-40%

Refillable Cartridges (Set of 6) for Epson 1400/1430 Compatible Auto-Reset

$ 12.64

Availability: 148 in stock
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: China
  • Type: Compatible
  • Color: Multicolor
  • MPN: IJEPSON14RC
  • Brand: InkJetPrintables
  • Condition: New
  • Print Technology: Inkjet
  • Compatible Brand: For Epson
  • Compatible Model: Epson 1430 Artisan
  • Custom Bundle: Yes
  • Bundle Description: Set of 6

    Description

    NON-OEM (compatible)
    for Epson* 1400,1430
    Refillable Cartridges
    HIGH YIELD Set of 6
    (EMPTY)
    Set of 6 "HIGH-YIELD" cartridges for the Epson* 1430 Artisan & Epson* 1400 Stylus inkjet printer.  These cartridges have auto-reset chips and higher ink capacity.  Basically that means they will last you for the life of the printer!  Simply refill over and over again with your favorite ink (use our
    POSITIVELY BLACK
    inkjet ink for film positives).  These are HIGH-YIELD cartridges that hold about 15cc's of ink in each.  Initial filling takes approximately 100cc's on ink for the set.  Make sure you have enough ink on hand.
    Compatible with Cartridge #
    T0791-T0796
    1 set of 6 each
    EMPTY
    Cartridges NON-OEM
    T0791
    Black
    cartridge
    T0792
    Cyan
    T0793
    Magenta
    T0794
    Yellow
    T0795
    Light Cyan
    T0796
    Light Magenta
    INSTRUCTIONS:
    Fill all 6 cartridges with your favorite ink first (follow "refilling" instructions)
    First time use: Start with FULL CARTRIDGES
    Perform "ink cartridge replacement" menu on your printer
    Remove the clear plug from the
    breather hole
    on each cartridge
    Insert
    ALL 6 CARTRIDGES
    into your printer
    Wait 10 minutes for ink to settle into printhead
    Perform 1-3 Cleaning Cycles to load all ink
    Start printing and saving $
    REFILLING:
    Refill only the cartridge that the printer has flagged as "empty"
    Perform "ink cartridge replacement" menu on your printer
    Remove empty cartridge
    Remove color coded plug
    Fill with 10-15cc's of ink
    Replace color coded plug
    Re-insert filled cartridge
    Start printing
    "Auto Reset Chip" will reset when cartridge gets down to 10% full
    Troubleshooting Refillable Cartridges:
    Question: My refillable cartridges are not being recognized by my printer.
    Answer: Make sure that all of our cartridges are installed as a set. These cannot be mixed with store bought/original cartridges. Remove clear rubber plugs. Remove and re-install, pressing firmly until they all click into place. Keep printer on while doing this.
    Question: My refillable cartridges are not printing.
    Answer: Make sure that the clear rubber plugs have been removed from the
    breather hole
    . OR, that the yellow tape is removed when cartridges are used first time.
    *NOTE:  EPSON is a registered Trademark of Seiko Epson Corporation (SEC) and Epson America, Inc.